Go to homepage
€0.00*

Ignition coil

Skip image gallery

€50.00*

Prices incl. VAT plus shipping costs

Variante
Product number: 161721922

Product information "Ignition coil"

Ignition coil suitable for various models, please measure and compare accordingly!
Dimensions:
Type 1: Overall length 73 mm, hole spacing 53 mm
Type 2: Overall length 74 mm, hole spacing 50 mm
Type 3: Overall length 77 mm, hole spacing 54 mm
Type 4: Replacement is type 1
Variante: Typ 2

Herstellerinformationen:
NSU Quickly und Moped Ersatzteile GmbH & Co.KG Siemensstr. 8 77948 Friesenheim WEEE-Nummer:

Verantwortliche Person:
B. Krippl Siemensstrasse 8 77948 Friesenheim DE info@nsu-quickly.de

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Skip product gallery

dazu:

Spark plug connector, watertight
Spark plug connector, watertight
Spark plug connector, orig. Beru, water-protected and interference-suppressed

€10.50*
Ignition cable 1.90m roll 5mm
Ignition cable 1.90m roll 5mm
Ignition cable 5mm, especially for ignition coil type 3

Content: 1.9 Meter (€2.05* / 1 Meter)

€3.90*
Spark plug cap Bakelite, as original with "NSU" logo
Spark plug cap Bakelite, as original with "NSU" logo
Plug connector as original! With "NSU" logo

€14.80*
Skip product gallery

Customers also bought

Overrunning set 2-speed engine FAG
Overrunning set 2-speed engine FAG
Complete overhaul kit for the 3-speed Quickly engineConsisting of all bearings, brand make FAGall shaft seals, all O-rings + manifold sealing ring

€62.80*
Nuts and washers for cylinder head
Nuts and washers for cylinder head
8-piece fastening set nuts and washers for the cylinder head- optionally galvanised or stainless steel -

From €2.90*
Details
Stud bolt for cylinder
Stud bolt for cylinder
Stud bolts for cylinder mounting, galvanised - 4 pieces 7 required per engine

€5.80*
Capacitor
Capacitor
Ignition capacitor different versions (for soldering or screwing) Capacitors are a frequent source of faults due to their age and should always be replaced

From €4.80*
Details
Ignition cable 1 m
Ignition cable 1 m
Ignition cable available in 5 mm or 7 mm diameter.Length per unit: 1 m Manufacturer: 5mm: Beru7mm: Herth+Buss

From €3.60*
Details
Rubber grommet for ignition and light cable with attachment
Rubber grommet for ignition and light cable with attachment
Rubber grommet for ignition cables for cables with 5mm or 7mm version

From €2.50*
Details
Skip product gallery

Customers also viewed

Ignition coil
Ignition coil
Ignition coil suitable for various models, please measure and compare accordingly! Dimensions: Type 1: Overall length 73 mm, hole spacing 53 mm Type 2: Overall length 74 mm, hole spacing 50 mm Type 3: Overall length 77 mm, hole spacing 54 mm Type 4: Replacement is type 1

From €50.00*
Details
Puller for pole wheel
Puller for pole wheel
Pole wheel puller for all Quickly motors Notes: Please note that the thread of the crankshaft must be protected by a brass pressure piece or similar if the pole wheels are stuck.Alternatively, the nut of the pole wheel can remain on the threaded stub.(loosen nut and turn flush to the end of the thread).

€8.80*
Bulb for headlight 3W system
Bulb for headlight 3W system
Bulb 6V 2.7 W Matching: Tail light bulb: 6V 0.6 W for lighting systems with a total output of 6V 3 W until approx. the end of 1955

€1.60*
This website uses cookies to ensure the best experience possible. More information...