Skip to main content

Spoke set Quickly S2

Product information "Spoke set Quickly S2"

The spokes for S2 with 25- or 26-inch rims are smooth M3.5 spokes, chrome-plated.
Length 229 mm or 243 mm.
Original "cloverleaf" spoke Berg-Union, leading manufacturer and supplier for two-wheelers of the 50s and 60s
for large solid hubs, please select wheel size!
Please note:
The spokes are suitable for 26x2.25 punched rims - not for 26x2.00 chrome rims!

All spoke sets are complete with nipples, outer nipple diameter (on the shaft) approx. 6 mm.
Delivery with smaller nipples possible on request
.
Ausf.: 26" wheels
Models: S2

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Similar products

Ball bearing for bearing flange TTK
Ball bearing specially designed for the Quickly TT-K and for Quickly T and TT (last version - with 3-point bearing flange)Brand bearings from FAG

€8.00*
Brake disc Quickly F23, rear wheel, used
Brake plate, for Quickly model F23, rear wheel - used as illustrated

€65.00*
Brake disc S2-23 rear wheel
original brake disc for the Quickly S2-23 rear hub

€69.00*
Brake plate F23 front wheel, second-hand
Support plate for front brake model Quickly F23, used as illustrated

€69.00*
Brake plate S2-23 T,TT rear wheel, second-hand
Rear brake plate for large solid hub, second-hand

€59.00*
Brake plate T,TT, front wheel, second-hand
Brake plate VR Quickly T, second-hand

€59.00*
Brake return spring, external
Ausf.: Rear wheel
Quickly S23-2,S2,F,T,TT,Quick50

€6.80*
Brake shoes cpl. S23-2/F/T/TT
Ready-glued brake shoes suitable for Quickly S2, S23-2, F, Quick 50, T, TT, TT/K Set for one wheel

€27.00*
Chain tensioner S2-23,F23, S2 - pair (slightly cranked)
Set of chain tensioners, galvanised, for 12mm thru axle(e.g. Quickly S2, S2-23, F, T, TT)- only available in a slightly offset version -

€3.90*
Front wheel F23 Used,without brake
Used front wheel Quickly F23 - aluminium rim, without brake (Attention: edge on the brake plate mount in 2 places small demolitions-

€69.00*
Front wheel Quickly T, TT, used with aluminium rim and brake
complete front wheel, used with aluminium rim and brake plate

€135.00*

Customers also bought

Ignition coil
Ignition coil suitable for various models, please measure and compare accordingly! Dimensions: Type 1: Overall length 73 mm, hole spacing 53 mm Type 2: Overall length 74 mm, hole spacing 50 mm Type 3: Overall length 77 mm, hole spacing 54 mm Type 4: Replacement is type 1

From €50.00*
Screw set for spider mounting
Special screw + nut galvanised

€7.20*
Carburettor gasket
Carburettor flange gasket approx. 8 mm thick

€4.80*
Stud bolt cylinder carburettor
Set of 2 stud bolts on cylinder for carburettor connection 19 mm for carburettor gasket 161600008 (8 mm thick) 38 mm for carburettor gasket Bakalit 161601008 (approx. 25 mm thick)

From €6.40*
Chrome rim 26 X 2.25, hallmarked
New chrome rim for Quickly S2

€56.00*
Rim tape 26"
Rim tape 26", should be replaced with every tyre change

€3.60*

Customers also viewed

Spoke set half hub 2nd version
chrome-plated thick spokes - Quickly N, S, half hub 26" wheels from frame no. 482755 Now new!Set of 9 short (233mm) inner and outer spokes and 9 long inner and outer spokes (262mm), as well as 36 nipples. Select the nipple size according to the rims Orig. "Cloverleaf" spoke, German brand quality Attention: if you do not order new rims, but continue to use the original rims, the nipple holes of the old front wheel rim must be drilled out! Then select "4.9 mm" (K) for nipple size When ordering rims and spokes at the same time, please select the outer nipple diameter 5.4 mm (G)!

From €52.00*
Spoke set Quickly S2
Ausf.: 25" wheels
The spokes for S2 with 25- or 26-inch rims are smooth M3.5 spokes, chrome-plated. Length 229 mm or 243 mm. Original "cloverleaf" spoke Berg-Union, leading manufacturer and supplier for two-wheelers of the 50s and 60s for large solid hubs, please select wheel size!Please note:The spokes are suitable for 26x2.25 punched rims - not for 26x2.00 chrome rims!All spoke sets are complete with nipples, outer nipple diameter (on the shaft) approx. 6 mm.Delivery with smaller nipples possible on request.

€48.00*
Woodruff key (wedge) - to the pinion
Matching Woodruff key (pinion gear shaft)

€0.80*
Radial seal ring to the pinion
Sealing ring for chain sprocket motor housing

€4.50*
Saddle cover NSU
Replacement saddle cover for original NSU saddle framewith "NSU" logo! made of rubber, as original incl. 4 fastening rivets available in the colours cream, grey or red-brown

From €34.00*
Spoke set N23
Set of 36 spokes M 3 incl. nipple - only for Quickly N23 high-quality chrome-plated spokes * original "cloverleaf" spoke, German brand quality Select the nipple size according to the rims (see product info) When ordering rims and spokes at the same time, please select the outer nipple diameter G: = 5.4 mmNipple size K: outer nipple diameter: 4.9 mm

From €47.00*