Quickly Cavallino

Das "Sportmoped" von NSU

Baujahr 1957 - 1960
Farbkombination cavallinorot/cavallinoweiß
Felgen/ Reifengröße 23 X 2.25

Shift fork 3-G.

€95.00*

"SprayMax" 2-component clearcoat

2K system, 400 ml spray can

Content: 0.4 Liter (€64.50* / 1 Liter)

€25.80*

2C paint: cavallino red

High-quality 2-component paint colour cavallino red Paint is mixed with hardener in a ratio of 2:1 (hardener must be ordered separately)

From €72.00*

Details

3-speed engine overrun kit FAG

Complete overhaul kit for the 3-speed Quickly engineConsisting of all bearings, brand make FAGall shaft seals, all O-rings + manifold sealing ring

€59.80*

Adjusting screw f. Start carburettor incl. nut

Starting carburettor adjusting screw for throttle cable adjustment incl. nut

€3.20*

Air filter for starter carburettor

Air filter in frame for all models with starter carburettor

€8.50*

Alternator side cover

Note different versions! for all 2-speed and 3-speed models with brake lever on the left-hand side of the motor: Quickly N, S, L, N23 and S23 or version for engines with brake lever on the right: Quickly S2, S23-2, F23, TT, TT/K

From €42.00*

Details

Assembly tool for clutch basket inside

Special tool for easy assembly of the inner clutch basket

€14.80*

Ball 4 mm for gear lever fitting

Ball 4 mm for original inside gear lever fitting

€0.20*

Ball bearing for clutch

Ball bearing NSU-Quickly Motor quality from FAG

€6.50*

Ball bearing for crankshaft

Ball bearing for crankshaft (quality from FAG) 2 pieces are needed!

€6.50*

Ball bearing for gear shaft

Ball bearing for the gear shaft 2-speed engine (2 pieces are required)for 3-speed engines one bearing is required and one bearing Article No. 160100601

€6.50*

Ball bearing gearbox shaft 3 speed

f. Driven shaft 3-G.

€6.80*

New

Ball bearing set 3 speed FAG

5-piece ball bearing set with brand bearings from FAG Complete set of bearings for engine overhaul

€29.80*

Bearing bolt for breaker, type 1

Breaker bearing bolts for all "Type 1" breakers

€6.80*

Bearing shell

Bearing shell for the wheel ball bearings of the NSU Quickly

€8.00*

Bell pull T,TT, Cav.

€6.50*

Bolt for brake tab incl. fuse

Bolt for brake linkage, incl. safety catch, stainless steel - for brake linkage or cable pull

€3.20*

Bolt for driving disc

Bearing bolt for driving disc on 3-speed engine

€3.50*

Bottom bracket axle

Bottom bracket axle for all 2-speed motors and 3-speed motors with left brake

€29.80*

Bracket for rear brake cable Quickly F, Cav, L

Bracket for attaching the brake cable

€4.80*

Brake control screw throttle grip M6

Screw at the bottom of the throttle grip - note dimensions! versions possible!

€8.90*

Brake lever on the rear wheel

Brake lever on the rear wheel hub 2nd version

€5.90*

Brake lever retaining ring (pair)

Set of 2 for all 2 and 3-speed engines with left brake

€1.00*

Brake pads for riveting on (2 pcs. incl. rivets)

Set of 2 pads for one wheel, suitable for Quickly N,S,L,N23,S23

€12.80*

Brake return spring, outer, rear wheel 2nd version

Brake return spring on the rear brake, 2nd version - suitable for N,S,L,N23,S23

€5.00*

Brake shoes cpl. 2nd version

Completely bonded brake shoes from current production - no cured old stock ( set for one wheel)

€26.80*

Breaker

Complete circuit breaker - note the different versions! Type 1 Bosch No. 1217013010, centre hole 6 mm, adjustment via eccentric,most common versionType 2 centre hole 8 mm, adjustment via 2 notches Please refer to the illustrations

From €9.50*

Details

Bulb for headlight 15W

6V 15W suitable for 17 Watt systems see also designation on the pole wheel (Example: ELZJ 17 L = 17 watts)Total output 17 watts : 15 W for headlights, 2 W for tail lights)

€3.00*

Bushing f. countershaft 3-G., right.

for all 3-speed engines from no. 743607

€10.80*

Bushing for countershaft 3-G left

Bushing for countershaft 3-speed, left (all engines) also for right crankcase half up to engine 743606

€10.80*

Bushing for shift shaft 3-G.

for all 3-speed Quickly engines

€6.00*

Capacitor

Ignition capacitor different versions (for soldering or screwing) Capacitors are a frequent source of faults due to their age and should always be replaced

From €4.80*

Details

Carburettor gasket

Carburettor flange gasket approx. 8 mm thick

€4.80*

Cavallino mudguard screw set

39-piece set for front and rear mudguard mounting

€9.80*

Cavallino sprocket (Italian hub)

for Italian (Amadori) hub (34 teeth)

€35.00*

Cavallino support handlebars

Cavallino support handlebars original support for handlebar Cavallino, from old stock

€24.90*

cavallino white 2K paint 250ml

High-quality 2-component paint for Quickly Cavallino Tankcolour: cavallino white

Content: 0.25 Liter (€136.00* / 1 Liter)

€34.00*

Chain sprocket

suitable from vehicle no. 20694Chain sprockets with 12 teeth are standard for all models. Depending on requirements or use, however, sprockets with 11 teeth (good climbing ability) or 13 teeth (higher top speed) can also be fitted. The 14-tooth sprocket can only be used after modifying or adapting the housing or using a weaker, non-reinforced chain.

From €17.50*

Details

Chain tensioner N,S,L,N23,S23 - pair

1 pair of chain tensioners for Quickly, bright zinc-plated with barrel nuts

€3.40*

Chrome rim 23 X 2.25, hallmarked

23 x 2.25 (1.35 - 19), chrome-plated punched version, 36 holes, hole diameter: 6.5mm

€52.00*

Circlip for clutch basket

€0.25*

Circlip for clutch cup

Special fuse under the clutch cup

€2.80*

Circlip in crankcase, left.

€1.00*

Circlip in the clutch cover

€1.00*

Clamp for exhaust

Clamp between exhaust manifold and silencer suitable for all models, chrome-plated

€6.50*

Clamping spring for starter flap

Clamping spring for cover plate pressure pin

€1.00*

Classic 2 petrol tap

Classic petrol tap in metal design (including strainer), suitable for all models except Quickly T. For Quickly N with small tank, please select Classic petrol tap.

€14.50*