2K system, 400 ml spray can

Shift wheel on the engine for all 2-speed versions

Complete overhaul kit for the 3-speed Quickly engineConsisting of all bearings, brand make FAGall shaft seals, all O-rings + manifold sealing ring

Starting carburettor adjusting screw for throttle cable adjustment incl. nut

Contents: 400 ml 2-component spray paint can in the colour "aviator blue" is required for the colour combination aviation blue/arcona sand (frame, suspension fork) New: now all Quickly colours as 2-component paint for spraying in the original "Spraymax" spray can SprayMax technology gives SprayMax spray paint cans the highest product quality, which clearly sets them apart from conventional spray paint cans. There is no comparable product quality in the entire competitive environment. You can paint with it just like with a spray gun!

Air filter in frame for all models with starter carburettor

Note different versions! for all 2-speed and 3-speed models with brake lever on the left-hand side of the motor: Quickly N, S, L, N23 and S23 or version for engines with brake lever on the right: Quickly S2, S23-2, F23, TT, TT/K

Content: 400 ml 2-component spray paint can in the colour "arconasand" is required for the colour combination aviation blue/arconasand ( (tank, sheet metal parts) Quickly S23, S2-23 F The SprayMax technology gives the SprayMax spray paint cans the highest product quality, which clearly sets them apart from conventional spray paint cans. There is no comparable product quality in the entire competitive environment. You can paint with it just like with a spray gun!

Special tool for easy assembly of the inner clutch basket

Ball 4 mm for original inside gear lever fitting

Ball bearing NSU-Quickly Motor quality from FAG

Ball bearing for crankshaft (quality from FAG) 2 pieces are needed!

Ball bearing for the gear shaft 2-speed engine (2 pieces are required)for 3-speed engines one bearing is required and one bearing Article No. 160100601

f. Driven shaft 3-G.

5-piece ball bearing set - brand bearings FAG

5-piece ball bearing set with brand bearings from FAG Complete set of bearings for engine overhaul

Complete ball set for steering, 42 balls (for top bottom)

Breaker bearing bolts for all "Type 1" breakers

2nd version - brake drum or opposite side

Bearing screw - special screw for rocker arm bearings

Bearing shell for the wheel ball bearings of the NSU Quickly

Bearing spacer bush for rocker arm (2 required per vehicle)

Bolt for brake linkage, incl. safety catch, stainless steel - for brake linkage or cable pull

Bearing bolt for driving disc on 3-speed engine

Bottom bracket axle for all 2-speed motors and 3-speed motors with left brake

1 x each decompression cable, throttle cable, handbrake cable, clutch cable, 2-speed gearshift cable

Retaining spring for fastening the speedometer(169204501)in the headlight

Screw at the bottom of the throttle grip - note dimensions! versions possible!

from. F.No. 482755

Note different versions!

Brake lever on the rear wheel hub 2nd version

Set of 2 for all 2 and 3-speed engines with left brake

Length 557 mm Stainless steel brake linkage, incl. locking plate suitable for Quickly N up to frame no. 50340 and N,S,N23,S23 from frame no. 482755 also suitable for Quickly T with Pränafa hub -- Brake linkage bracket is not required --

Without baking

Inner spring for brake shoes 2nd version

Brake return spring on the rear brake, 2nd version - suitable for N,S,L,N23,S23

Completely bonded brake shoes from current production - no cured old stock ( set for one wheel)

(e.g. screws)

6V 15W suitable for 17 Watt systems see also designation on the pole wheel (Example: ELZJ 17 L = 17 watts)Total output 17 watts : 15 W for headlights, 2 W for tail lights)

for all 3-speed engines from no. 743607

Bushing for countershaft 3-speed, left (all engines) also for right crankcase half up to engine 743606

Bearing bush for gearwheel 2-speed motor

Bearing bush (housing/shift shaft) 2 speed

for all 3-speed Quickly engines

Cap for holding the decorative seal

Carburettor flange gasket approx. 8 mm thick

1 pair of chain tensioners for Quickly, bright zinc-plated with barrel nuts

23 x 2.25 (1.35 - 19), chrome-plated punched version, 36 holes, hole diameter: 6.5mm

Special fuse under the clutch cup

Clamp between exhaust manifold and silencer suitable for all models, chrome-plated

Clamp complete with bolts and nuts for attaching the saddle to the seat post (seat tube)

Fastening screw with cone for attaching the saddle to the frame

Clamping spring for cover plate pressure pin

Classic petrol tap in metal design (including strainer), suitable for all models except Quickly T. For Quickly N with small tank, please select Classic petrol tap.

Original clutch basket, inner for 5-plate clutch

New outer clutch basket for 5-plate clutch