Skip to main content

Quickly T

"Traum-Quickly"

Baujahr 1959 - 1963
Farbkombination königsblau/rhodosblau
oder lindgrün/moosgrün
Felgen/ Reifengröße 23 X 2.25 / 23 X 2.50
Alu-Felgen

3-Gang Getriebe
1,7 PS Motor mit Gebläsekühlung

Vorne und hinten mit hydraulischen Stoßdämpfern





Filter
Shift fork 3-G.

€95.00*
"SprayMax" 2-component clearcoat
2K system, 400 ml spray can

Content: 0.4 Liter (€64.50* / 1 Liter)

€25.80*
3-speed engine overrun kit FAG
Complete overhaul kit for the 3-speed Quickly engineConsisting of all bearings, brand make FAGall shaft seals, all O-rings + manifold sealing ring

€59.80*
Adjusting screw f. Clutch (slotted)

€2.80*
Adjusting screw f. Start carburettor incl. nut
Starting carburettor adjusting screw for throttle cable adjustment incl. nut

€3.20*
Alternator side cover
Note different versions! for all 2-speed and 3-speed models with brake lever on the left-hand side of the motor: Quickly N, S, L, N23 and S23 or version for engines with brake lever on the right: Quickly S2, S23-2, F23, TT, TT/K

From €42.00*
Aluminium profile strips for luggage carrier L and T/pair
incl. rubber pad for Quickly L, also suitable for Quickly T without pillion passenger

€39.00*
Assembly tool for clutch basket inside
Special tool for easy assembly of the inner clutch basket

€14.80*
Ball bearing for bearing flange TTK
Ball bearing specially designed for the Quickly TT-K and for Quickly T and TT (last version - with 3-point bearing flange)Brand bearings from FAG

€8.00*
Ball bearing for clutch
Ball bearing NSU-Quickly Motor quality from FAG

€6.50*
Ball bearing for crankshaft
Ball bearing for crankshaft (quality from FAG) 2 pieces are needed!

€6.50*
Ball bearing for gear shaft
Ball bearing for the gear shaft 2-speed engine (2 pieces are required)for 3-speed engines one bearing is required and one bearing Article No. 160100601

€6.50*
Ball bearing gearbox shaft 3 speed
f. Driven shaft 3-G.

€6.80*
Ball bearing set 3 speed FAG
5-piece ball bearing set with brand bearings from FAG Complete set of bearings for engine overhaul

€29.80*
Ball set for steering (42 pcs.)
Complete ball set for steering, 42 balls (for top bottom)

€5.00*
Bearing bolt for breaker, type 1
Breaker bearing bolts for all "Type 1" breakers

€6.80*
Bearing bolt for shock absorber F,T,TT,TTK,Quick50
Bearing bolt for front or rear shock absorber mounting

€4.60*
Bearing bush for shock absorber F,T,TT,TTK,Quick 50
Bearing bush for front or rear shock absorbers.2 or 4 bushes are required per vehicle.

€4.00*
Bearing screw T,TT,TT-K
Special screw for rocker arm bearingsuitable for Quickly T, TT and TT-K

€4.00*
Bearing spacer bushing
Bearing spacer bush for rocker arm (2 required per vehicle)

€4.50*
Bell pull T,TT, Cav.

€6.50*
Bolt for brake tab incl. fuse
Bolt for brake linkage, incl. safety catch, stainless steel - for brake linkage or cable pull

€3.20*
Bolt for driving disc
Bearing bolt for driving disc on 3-speed engine

€3.50*
Bottom bracket axle Quickly F used

€59.00*
Bottom bracket axle Quickly T,TT,F23

€29.80*
Brake lever for foot brake (3-speed right-hand brake) - second-hand
Used brake lever for engines with brake output on the right

€22.50*
Brake lever retaining rings Quickly S2, F23, S2-23
1 set of circlips for right-hand brake motor

€1.00*
Brake linkage for N,S,N23,S23 from F. 482754 and N to 50340 - Length: 557 mm
Length 557 mm Stainless steel brake linkage, incl. locking plate suitable for Quickly N up to frame no. 50340 and N,S,N23,S23 from frame no. 482755 also suitable for Quickly T with Pränafa hub -- Brake linkage bracket is not required --

€13.80*
Brake linkage for Quickly T, TT, length 490 mm
Stainless steel brake linkage, incl. locking plate Length 490 mm: for Quickly TT

€13.80*
Brake plate S2-23 T,TT rear wheel, second-hand
Rear brake plate for large solid hub, second-hand

€59.00*
Brake plate T,TT, front wheel, second-hand
Brake plate VR Quickly T, second-hand

€59.00*
Brake return spring, external
Ausf.: Rear wheel
Quickly S23-2,S2,F,T,TT,Quick50

€6.80*
Brake shoes cpl. S23-2/F/T/TT
Ready-glued brake shoes suitable for Quickly S2, S23-2, F, Quick 50, T, TT, TT/K Set for one wheel

€27.00*
Breaker
Complete circuit breaker - note the different versions! Type 1 Bosch No. 1217013010, centre hole 6 mm, adjustment via eccentric,most common versionType 2 centre hole 8 mm, adjustment via 2 notches Please refer to the illustrations

From €9.50*
Bulb for headlight 15W
6V 15W suitable for 17 Watt systems see also designation on the pole wheel (Example: ELZJ 17 L = 17 watts)Total output 17 watts : 15 W for headlights, 2 W for tail lights)

€3.00*
Bushing f. countershaft 3-G., right.
for all 3-speed engines from no. 743607

€10.80*
Bushing for countershaft 3-G left
Bushing for countershaft 3-speed, left (all engines) also for right crankcase half up to engine 743606

€10.80*
Bushing for shift shaft 3-G.
for all 3-speed Quickly engines

€6.00*
Cable support Quickly T gearstick
Cable support for Quickly T handlebars, version with square fittings

€14.90*
Capacitor
Ignition capacitor different versions (for soldering or screwing) Capacitors are a frequent source of faults due to their age and should always be replaced

From €4.80*
Carburettor gasket (Bakelite)
complete with 2 gasketsapprox. 2.5 cm thick suitable for cylinders with long stud bolts for carburettor mounting, the 3rd version intake hose is also required

€10.80*
Carrier Quickly T
Frame carrier model Quickly T

€89.00*
Chain case
Chain case - new edition - for Quickly T, TT or TTK.Top quality!

From €265.00*
Chain case screw set
Mounting chain case Quickly T, TT, TT-K

€2.80*
Chain sprocket
suitable from vehicle no. 20694Chain sprockets with 12 teeth are standard for all models. Depending on requirements or use, however, sprockets with 11 teeth (good climbing ability) or 13 teeth (higher top speed) can also be fitted. The 14-tooth sprocket can only be used after modifying or adapting the housing or using a weaker, non-reinforced chain.

From €17.50*
Chain tensioner S2-23,F23, S2 - pair (slightly cranked)
Set of chain tensioners, galvanised, for 12mm thru axle(e.g. Quickly S2, S2-23, F, T, TT)- only available in a slightly offset version -

€3.90*
Chrome rim 23 X 2.25, hallmarked
23 x 2.25 (1.35 - 19), chrome-plated punched version, 36 holes, hole diameter: 6.5mm

€52.00*
Chrome rim 23 x 2.50, hallmarked
suitable for Quickly S23-2,F,T,TT, punched version, 36 holes, hole diameter: 6.5mm

€58.00*
Chrome ring for S23, S23-2,F, T, TT, TT-K
New chrome ring for headlight models T, TT and 23 series

€22.80*
Circlip for clutch basket

€0.25*
Circlip for clutch cup
Special fuse under the clutch cup

€2.80*
Circlip for spacer tube

€0.40*
Circlip in crankcase, left.

€1.00*
Circlip in the clutch cover

€1.00*
Clamp for exhaust
Clamp between exhaust manifold and silencer suitable for all models, chrome-plated

€6.50*
Clamping spring for starter flap
Clamping spring for cover plate pressure pin

€1.00*
Clutch basket inside (f.5 discs)
Original clutch basket, inner for 5-plate clutch

€39.80*
Clutch basket outer for 3 discs, second-hand
Clutch basket for 3-plate clutch, external - used spare part

€22.80*
Clutch basket, inside 3 discs, new
inner clutch basket for 3-way clutch, new

€32.00*