2K system, 400 ml spray can

Complete overhaul kit for the 3-speed Quickly engineConsisting of all bearings, brand make FAGall shaft seals, all O-rings + manifold sealing ring

Satz (2 Stück) links und rechts, wie abgebildet

suitable for orig. Magura Handle (newer version)

Starting carburettor adjusting screw for throttle cable adjustment incl. nut

GefahrGefahrenhinweise:H222: Extrem entzündbares Aerosol.H229: Behälter steht unter Druck: kann bei Erwärmung bersten.H319: Verursacht schwere Augenreizung.H336: Kann Schläfrigkeit und Benommenheit verursachen.Sicherheitshinweise:P101: Ist ärztlicher Rat erforderlich, Verpackung oder Kennzeichnungsetikett bereithalten.P102: Darf nicht in die Hände von Kindern gelangen.P103: Vor Gebrauch Kennzeichnungsetikett lesen.P210: Von Hitze, heißen Oberflächen, Funken, offenen Flammen sowie anderen Zündquellenarten fernhalten. Nicht rauchen.P211: Nicht gegen offene Flamme oder andere Zündquelle sprühen.P251: Nicht durchstechen oder verbrennen, auch nicht nach Gebrauch.P261: Einatmen von Staub/Rauch/Gas/Nebel/Dampf/Aerosol vermeiden.P271: Nur im Freien oder in gut belüfteten Räumen verwenden.P280: Schutzhandschuhe/Schutzkleidung/Augenschutz/Gesichtsschutz tragenP305: BEI KONTAKT MIT DEN AUGEN:P351: Einige Minuten lang behutsam mit Wasser ausspülen.P338: Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter ausspülen.P312: Bei Unwohlsein GIFTINFORMATIONSZENTRUM/Arzt/... anrufen. P337: Bei anhaltender Augenreizung:P313: Ärztlichen Rat einholen/ärztliche Hilfe hinzuziehen.P410: Vor Sonnenbestrahlung schützen.P412: Nicht Temperaturen über 50 °C/122 °F aussetzen.P501: Inhalt/Behälter ... zuführen.

Note different versions! for all 2-speed and 3-speed models with brake lever on the left-hand side of the motor: Quickly N, S, L, N23 and S23 or version for engines with brake lever on the right: Quickly S2, S23-2, F23, TT, TT/K

Special tool for easy assembly of the inner clutch basket

Ball 4 mm for original inside gear lever fitting

Ball bearing specially designed for the Quickly TT-K and for Quickly T and TT (last version - with 3-point bearing flange)Brand bearings from FAG

Ball bearing NSU-Quickly Motor quality from FAG

Ball bearing for crankshaft (quality from FAG) 2 pieces are needed!

Ball bearing for the gear shaft 2-speed engine (2 pieces are required)for 3-speed engines one bearing is required and one bearing Article No. 160100601

f. Driven shaft 3-G.

5-piece ball bearing set with brand bearings from FAG Complete set of bearings for engine overhaul

Complete ball set for steering, 42 balls (for top bottom)

Breaker bearing bolts for all "Type 1" breakers

Bearing bolt for front or rear shock absorber mounting

Bearing bush for front or rear shock absorbers.2 or 4 bushes are required per vehicle.

Special screw for rocker arm bearingsuitable for Quickly T, TT and TT-K

Bearing spacer bush for rocker arm (2 required per vehicle)

Bolt for brake linkage, incl. safety catch, stainless steel - for brake linkage or cable pull

Bearing bolt for driving disc on 3-speed engine

Screw at the bottom of the throttle grip - note dimensions! versions possible!

1 set of circlips for right-hand brake motor

Stainless steel brake linkage, incl. locking plate Length 490 mm: for Quickly TT

Rear brake plate for large solid hub, second-hand

Brake plate VR Quickly T, second-hand

Quickly S23-2,S2,F,T,TT,Quick50

Ready-glued brake shoes suitable for Quickly S2, S23-2, F, Quick 50, T, TT, TT/K Set for one wheel

6V 15W suitable for 17 Watt systems see also designation on the pole wheel (Example: ELZJ 17 L = 17 watts)Total output 17 watts : 15 W for headlights, 2 W for tail lights)

for all 3-speed engines from no. 743607

Bushing for countershaft 3-speed, left (all engines) also for right crankcase half up to engine 743606

for all 3-speed Quickly engines

Cap for holding the decorative seal

complete with 2 gasketsapprox. 2.5 cm thick suitable for cylinders with long stud bolts for carburettor mounting, the 3rd version intake hose is also required

Chain case - new edition - for Quickly T, TT or TTK.Top quality!

Mounting chain case Quickly T, TT, TT-K

Set of chain tensioners, galvanised, for 12mm thru axle(e.g. Quickly S2, S2-23, F, T, TT)- only available in a slightly offset version -

23 x 2.25 (1.35 - 19), chrome-plated punched version, 36 holes, hole diameter: 6.5mm

suitable for Quickly S23-2,F,T,TT, punched version, 36 holes, hole diameter: 6.5mm

Special fuse under the clutch cup

Locking ring for Quickly TT-K for kickstart spring or for Quickly F23 swing axle

Clamp between exhaust manifold and silencer suitable for all models, chrome-plated

Clamping spring for cover plate pressure pin

Classic petrol tap in metal design (including strainer), suitable for all models except Quickly T. For Quickly N with small tank, please select Classic petrol tap.

Original clutch basket, inner for 5-plate clutch

New outer clutch basket for 5-plate clutch

inner clutch basket for 3-way clutch, new