1 set of fuses, galvanised

Locking bolt for all 3-speed engines incl. spring

Lubricating felt with holder for screwing onto the base plate

Lubricating felt for ignition - version with fastening rivet

Main jet for all Quickly carburettor types - various jet sizes are available for tuning. Standard range for 1/9 carburettors: 54 - 58 Standard rangefor 1/12 carburettors: 60 - 66 All jets are original Bing parts!

Manifold sealing ring suitable for all versions 2 pieces are required

Swivelling mirror for the handlebar mounting in solid and high-quality construction - left Material: arm made of zinc die-castMirror head dimensions: 80 x 120 mm

for mounting with clamp on the handlebars

Special tool for easy assembly and disassembly of the clutch

suitable for models L, Cav, TT or TT/K high-gloss chrome-plated

Plug nipple for handbrake or clutch cable2 pieces are required per vehicle!

Beautiful reprint of original NSU advertising boards with the slogan"Wann startest Du auf NSU"Each board in Format DIN A3 (297 x 420 mm) - five advertising boards printed on both sides on chromo cardboard (400g/sqm) and glossy foil laminated, with 2 eyelets (each at the top corners).The advertising panel with the imprint "DU" is punched out in the centre.Courtesy of AUDI AG / NSU GmbH

Beautiful NSU emblem for mudguard, true to the original

The repair instructions were once aimed at the mechanics in the NSU workshops and conveyed the specialist knowledge required for a successful repair. Today, on the other hand, the content is primarily aimed at NSU Quickly enthusiasts. Old knowledge from the 1960s is required to successfully maintain the NSU Quickly, to carefully preserve its value or to continue using this popular historic moped. New edition! Old knowledge 1962-

Stainless steel hexagon nut for brake plate mounting for NSU Quickly up to vehicle 482754: Rust-free reliability

Stainless steel nut with galvanised spring washer for fastening the brake lever to the brake key (wheel hub)

6-piece, VA

8-piece fastening set nuts and washers for the cylinder head- optionally galvanised or stainless steel -

Stainless steel oil filler or drain plug

Oil drain plug + oil filler plug + oil check plug + 3 seals

with 6mm hose connection. The petrol filter can be dismantled and cleaned, Made in Italy. Dimensions: - Outer diameter approx. 22mm - Total length approx. 64mm - Filter length approx. 40mm - Length of the connections approx. 12mm

Collar screw for fastening the decorative lever no. 164400909, galvanised

Oval-head screw for fastening the throttle grip - galvanised - suitable for all models except L and T

for gear lever mounting, suitable for all models except L + T

for Quickly Cavallino, screw length 40 mm

UnionPedals, old version,beautiful classic shape

Fabric petrol hose length 1 metre

Petrol hose, clear - new quality! - Petrol and oil resistantUnit 1 m

Petrol tap M10X1

Classic design - Tap body made entirely of metal suitable for all models (except Quickly T), incl. sealespecially for Quickly N, with small tank (extra long strainer)

Seal between petrol tap and tank

Piston pin suitable for all models / Quickly engines.

Standard fuse for original pistons, replace after each change!

Piston pin lock e.g. for Meteor or Parmakit pistons

different versions,please select accordingly!

Set: 1L HS-Premium filler (light grey) "Spiess-Hecker" + 250 ml hardener (included!)Mixing ratio: 4:1

Rust protection primer/adhesive primer

(from frame to headlight) 1 unit = 50 cm

for all starter carburettor versions

Radial seal ring shift shaft for 3-speed engines

Oil seal for the left crankshaft sideis recommended for an engine overhaul!

Crank drive right

Made from high-quality material, this sealing ring ensures that your wheel bearing is protected from moisture and dirt

Sealing ring for chain sprocket motor housing

for various models

Rear light pad for Quickly N and rear light, cream-coloured

1-litre tin of 2K acrylic thinner

For attaching the jet needle, suitable for all carburettors

Rim tape from Heidenaushould be replaced every time you change your tyres.

on the frame for all vehicles with starter carburettor

Rubber grommet on the carburettor (adjusting screw) at the top

Neuer Einsatz für den Cavallino Scheinwerfer, bestehend aus kpl. Einheit Glas mit Reflektor.

Screw nipple for attaching the decorative cable to the lever on Quickly N,S,N23,S23,F

Screw plug, aluminium at the bottom of the carburettor