Special screw + nut galvanised

Fastening screw set for carburettor

Seal for the 3-speed shift cable on the engine (lower bushing)

O-ring on the clutch cup

Special sealing ring for bottom bracket axle for all models

O-ring between clutch basket and crankshaft - Important! lack of compression if sealing ring is missing

Set with 3 sealing rings: 1x each for oil filler/drain plug and oil check plug

Nut + spring washer for chain sprocket galvanised

Set of 2 nuts + 2 spring washers

Clutch repair kit:Sealing rings for clutch cup and crankshaft,Circlip for clutch basket and lock washers for clutch shaft - 5-piece - Set price -

Screw set for fastening the base plate and the breaker. 9-piece

suitable -for twist grip set for left + right Colour: cream Delivery only as PU with 2 pieces only suitable for Quickly T from F.No. 2928720

2 nipples for attaching the 3-speed gearshift cable to the engine (gearshift paddle)

Set of 3 with 0.2 + 0.3 + 0.5 mmbetween bearing cone and brake plate

Set of 3 piecesThickness 0.5 -0.6 and 0.7

Set with seal, cap and locking disc for decompression valve --set price

Used shift fork for 3-speed gearbox

for headlights and fittings 2-coat paint - must be painted over with clear coat.

Suitable for all carburettor models

New sliding wheel for the improved countershaft

Set with cover seal, float seal ring, seal for needle nozzle, clamping spring, retaining plate for nozzle needle, disc for throttle slide, 2 screws each for float housing cover and cover plate Set price

Set with 0.2 + 0.3 + 0.5 mm disc

Spacer tube on the bottom bracket axle 3-speed motors (left)

Spacer tube to bottom bracket axle 3-G. for all "left" brake motors (not Quickly T,TT,F) 31.2 mm long

Bosch Multi-range candle, ideal for the Quickly

Plug connector as original! With "NSU" logo

Spark plug connector, orig. Beru, water-protected and interference-suppressed

silver-grey - length 700 mm, suitable for NSU Quickly Cavallino

Speedometer drive - suitable for Quickly N23, S23 and Cavallino

New speedometer for the Quickly Cavallino

  Hochwertiger BUMM Marken-Spiegel mit Lenkerinnenbefestigung für die linke Seite Ihres Mopeds.  Der Spiegel ist speziell entwickelt, um direkt in den Lenker eingebaut zu werden, sodass er eine nahtlose Integration und eine klare Sicht auf den rückwärtigen Verkehr ermöglicht. Das robuste Gehäuse gewährleistet Langlebigkeit und Schutz vor Wettereinflüssen. Einfach zu montieren,  

Complete spoke set with 36 chrome-plated thick spokes incl. nipples, for use with new chrome rims. Original "cloverleaf" spokes, German brand quality

Set of 36 chrome-plated thick-end spokes + 36 nipples, for one wheelSpoke length: 211 mm - Nipple outer diameter approx. 5.4 mmSuitable for S23 or Cavallino (German hub) - 23" rims, full hub Original "cloverleaf" spoke, German brand quality Also available with "smaller" nipples on request, i.e. outer diameter of the nipple shaft approx. 4.9 mm

Galvanised spring retainer on the clutch

Sprocket, chain wheel NSU Quickly 2nd version (bolted), 36 teeth

New starter carburettor with 12 mm passage!

Start slide for all start carburettors

New steering lock for Quickly models TT, TT-K and Cavallino - incl. 2 keys

Stud bolts for cylinder mounting, galvanised - 4 pieces 7 required per engine

Bulb for the rear light for 17 watt system

Complete rear light with rubber pad and inner part (without bulb) suitable for Quickly N, S, Cavallino - all versions - Replacement from NSU also for the oval predecessor model

High-gloss polished aluminium fuel filler cap, suitable for all models incl. seal

Lockable fuel filler cap, incl. seal and 2 keys

Complete cable -incl. top pipe bendPlease note the different versions (model or frame number/carburettor type) and select accordingly!The adjusting screw and rubber grommet on the carburettor are separate parts (see carburettor group),please order separately if required

for front or rear thru axle, as original

Thrust washer for 2-speed countershaft or 3-speed. gear shaft 1mm

Set with 1x disc each 0.5-0.6-0.7-0.8-0.9 mm

Thrust washer on throttle grip tube - for all throttle twist grips from vehicle 268 491

Type plate blanco, incl. 2 fastening rivets for all models for attachment to the frame / control head

Type plate, blank on motor incl. 2 fastening rivets

For the 23 X 2.25 tyres, choose between Conti and Anlas - Both makes are ideally suited for the Quickly.

No more burnt-out light bulbs due to overvoltage! Easy to install voltage limiter! Connect the yellow cable to the live wire, black cable to the frame - done!

Wedge crank (pedal arms) set for left and right), matt chrome-plated as original in top quality

Wheel ball bearing in original design

23X2.25 tyres for Quickly Cavallino, S23 as well as T and TT - proven Conti quality in whitewall!