O-ring between clutch basket and crankshaft - Important! lack of compression if sealing ring is missing

New seat bench cover for Quickly 23 - cream / blue, custom-fit quality - handmade in Germany

Gebr. seat lock for Quickly 23

Lock washers for shock absorber bolts (1 piece required per shock absorber)

Set with 3 sealing rings: 1x each for oil filler/drain plug and oil check plug

Matching bushing set for swing arm bearing model Quickly FSet with 2 bushings -

Set of 2 bearing bushes for one rocker arm, suitable for all models from F.No. 482755 (except Cav)

Set with bearing bush, bearing bolt and fusesuitable for front or rear shock absorbersOne set is for one shock absorber!

suitable for all models from F.No. 482755 (except Cav.) , set of 2 pieces for one rocker arm

Nut + spring washer for chain sprocket galvanised

Set of 2 nuts + 2 spring washers

Set of special nuts for shock absorbers

Set with 2 bearing bolts (special bolt) + 2 stop nuts for rocker arm bearing

Suitable for tilt stands N23,S23,S2-23,F,T,TT, TT/K Set consists of 2 bearing collar bolts + 2 nuts + 4 spring washers

Set with 2 clamping screws + 2 spring washers

Clutch repair kit:Sealing rings for clutch cup and crankshaft,Circlip for clutch basket and lock washers for clutch shaft - 5-piece - Set price -

Suitable for all models from F.No. 482755 (except Cav.)Set of 2 for one rocker arm

Set with 2 bolts + 4 spring washers (VA)

Screw set for fastening the base plate and the breaker. 9-piece

suitable -for twist grip set for left + right Colour: cream Delivery only as PU with 2 pieces only suitable for Quickly T from F.No. 2928720

Set of 2 handlebar bolts, cap nuts and washers stainless steel

Set: Quickly 23 handlebars,consisting of: 1 handlebar, 2 handlebar clamps, stainless steel screw set

Bolt set for handlebar support, stainless steel - consisting of 2 bolts, 2 nuts and lock washers.

Set of 2 screws, complete with lock washers and nut, stainless steel

Set of 3 piecesThickness 0.5 -0.6 and 0.7

Set with seal, cap and locking disc for decompression valve --set price

Set of 2 springs, suitable for Quickly N,S,L,N23,S23,S23-2,F also for Quickly L suspension

One set of bump stops with rubber buffer (2 pieces for one vehicle), suitable for N,S,L,N23,S23,S2-23,F23

New stainless steel shaft for Quickly F23 swingarm

Used shift fork for 3-speed gearbox

for headlights and fittings 2-coat paint - must be painted over with clear coat.

Suitable for all carburettor models

New sliding wheel for the improved countershaft

Set with cover seal, float seal ring, seal for needle nozzle, clamping spring, retaining plate for nozzle needle, disc for throttle slide, 2 screws each for float housing cover and cover plate Set price

Fußrasten für alle Modelle mit Sitzbank (ausgenommen Quickly T)ovale Ausführung

Set with 0.2 + 0.3 + 0.5 mm disc

Stainless steel spacer for Quickly F23, rear wheel

Spacer for mounting on the rear wheel hub Quickly F23, stainless steel

Spacer tube for bottom bracket axle S2/F, T,TT (right-hand brake motors)

Bosch Multi-range candle, ideal for the Quickly

Plug connector as original! With "NSU" logo

Spark plug connector, orig. Beru, water-protected and interference-suppressed

incl. rubber seal suitable for: Quickly N,S,L,N23,S23,S23-2,S2,F - not for T,TT,TT/K

silver-grey - Length: 850 mm Connection nuts top and bottom identical

Speedometer drive for Quickly models with large solid hubs (Quickly S2, S2-23, F23, T, TT, TTK.Version as original VDO.Top quality

  Hochwertiger BUMM Marken-Spiegel mit Lenkerinnenbefestigung für die linke Seite Ihres Mopeds.  Der Spiegel ist speziell entwickelt, um direkt in den Lenker eingebaut zu werden, sodass er eine nahtlose Integration und eine klare Sicht auf den rückwärtigen Verkehr ermöglicht. Das robuste Gehäuse gewährleistet Langlebigkeit und Schutz vor Wettereinflüssen. Einfach zu montieren,  

36 ED spokes 208 mm + 36 spoke nipples, chrome-plated,Set for 1 wheel, 23" Original "cloverleaf" spoke, German brand quality!

for Quickly S23-2, F, T,TT,TTK when using new steel rims,36 spokes, Made in Germany, cloverleaf incl. nipple

Galvanised spring retainer on the clutch

Sprocket 36 teeth

New starter carburettor with 12 mm passage!

Start slide for all start carburettors

Stand retaining spring for stable tilt stand -standard on Quickly S23,F23,N23, T,TT and TT-K, S2is required for Quickly N,S and L when replacing the wire stand with the tilt stand

suitable for S23,S23-2,F with handlebar fairing - 2keys with extra long key neck!

Suitable for top or bottom (order 2 pcs.)

Stud bolts for cylinder mounting, galvanised - 4 pieces 7 required per engine

Suspension fork, used 3rd version in different variants

for Quickly F23, T,TT TT-K for all 3-speed engines with right-hand brake version