1-litre tin of 2K acrylic thinner

for headlight adjustment on Quickly L and all 23" models (except N23)

Replacement chrome ring, top quality for Quickly speedometers, eye-catcher for every moped

For attaching the jet needle, suitable for all carburettors

Rim tape from Heidenaushould be replaced every time you change your tyres.

Rocker arm set for Quickly N, S,L, S23,N23 used and reconditioned in exchangeThe rocker arms are newly galvanised, fitted with new bushes and ready for installation.Please send us your cleaned and exchangeable old parts in advance.

Front support for tank S23,S23-2,F23

Replacement rubber for all side stands

Rubber cap for ignition cable-ignition coil connection with screwed connection (black plastic coils)

on the frame for all vehicles with starter carburettor

Rubber grommet on the carburettor (adjusting screw) at the top

Rubber grommet for brake cable and speedometer cable for Quickly S23, S2-23 and F23 on the front mudguard

1 pair of rubber plugs for damping the suspension - are inserted into the springs.

1 set of rubber stops for steering / suspension fork

Rubber seal, cream white for installation between speedometer and headlight

New saddle shaft tube, galvanised

10-piece set of springs for the NSU saddle

Stainless steel screw for tank - versions for small and large tanks

Screw nipple for attaching the decorative cable to the lever on Quickly N,S,N23,S23,F

Screw plug, aluminium at the bottom of the carburettor

Complete set with screws, nuts, washers, spring washers for fastening the Quickly T stainless steel air duct

Set with 2 bolts VA, incl. spring washers + nut for mounting clamp exhaust silencer

8-piece, made of VA, suitable for F23,S2-23, S23

Special screw + nut galvanised

Special mounting kit for the Quickly 23 handlebar fairing.5-piece and with stainless steel screws

Fastening screw set for the tool box of the 23 models in stainless steel suitable for S23, S2-23, F23 -as original-

Fastening screw set for carburettor

2 seals, self-adhesive, for the Bakelite piece

Seal for the 3-speed shift cable on the engine (lower bushing)

O-ring on the clutch cup

Special sealing ring for 2-speed selector shaft

Special sealing ring for bottom bracket axle for all models

O-ring between clutch basket and crankshaft - Important! lack of compression if sealing ring is missing

Set with 3 sealing rings: 1x each for oil filler/drain plug and oil check plug

Set of 2 bearing bushes for one rocker arm, suitable for all models from F.No. 482755 (except Cav)

suitable for all models from F.No. 482755 (except Cav.) , set of 2 pieces for one rocker arm

Nut + spring washer for chain sprocket galvanised

Set of 2 nuts + 2 spring washers

5-piece bearing set with our quality bearings "!house brand"

Set with 2 bearing bolts (special bolt) + 2 stop nuts for rocker arm bearing

Suitable for tilt stands N23,S23,S2-23,F,T,TT, TT/K Set consists of 2 bearing collar bolts + 2 nuts + 4 spring washers

Set with 2 clamping screws + 2 spring washers

Clutch repair kit:Sealing rings for clutch cup and crankshaft,Circlip for clutch basket and lock washers for clutch shaft - 5-piece - Set price -

Suitable for all models from F.No. 482755 (except Cav.)Set of 2 for one rocker arm

Set with 2 bolts + 4 spring washers (VA)

Screw set for fastening the base plate and the breaker. 9-piece

suitable -for twist grip set for left + right Colour: cream Delivery only as PU with 2 pieces only suitable for Quickly T from F.No. 2928720

Set of 2 handlebar bolts, cap nuts and washers stainless steel

Set: Quickly 23 handlebars,consisting of: 1 handlebar, 2 handlebar clamps, stainless steel screw set

2 nipples for attaching the 3-speed gearshift cable to the engine (gearshift paddle)

Set of 3 with 0.2 + 0.3 + 0.5 mmbetween bearing cone and brake plate

Bolt set for handlebar support, stainless steel - consisting of 2 bolts, 2 nuts and lock washers.

Set of 2 screws, complete with lock washers and nut, stainless steel

Set of 3 piecesThickness 0.5 -0.6 and 0.7

Set with seal, cap and locking disc for decompression valve --set price

Set of 2 springs, suitable for Quickly N,S,L,N23,S23,S23-2,F also for Quickly L suspension

One set of bump stops with rubber buffer (2 pieces for one vehicle), suitable for N,S,L,N23,S23,S2-23,F23