Shift fork for all 2-speed engines

Used shift fork for 3-speed gearbox

New 2-speed gear lever - suitable for all Quickly models, ready to install with rubber grip, clutch lever and screw for deco lever

Shift shaft for all 2-speed engines

Shift spring in gearbox, for all 2-speed engines

Shift claw for all 2-speed engines Installation note: the unscrewed side must face the ignition!

Side stand suitable for Quickly N+S and 23 models (except Quickly F) Easy to fit: 1 engine mounting screw must be replaced by a longer one!

for headlights and fittings 2-coat paint - must be painted over with clear coat.

Suitable for all carburettor models

New sliding wheel for the improved countershaft

Set with cover seal, float seal ring, seal for needle nozzle, clamping spring, retaining plate for nozzle needle, disc for throttle slide, 2 screws each for float housing cover and cover plate Set price

between gear shaft and gear wheel

Set with 0.2 + 0.3 + 0.5 mm disc

Spacer tube on bottom bracket axle for 2-speed motorInstallation note: Clearance between spacer tube and large gear wheel must be 0.2-0.3 mm!

Spacer tube on the bottom bracket axle 3-speed motors (left)

Spacer tube to bottom bracket axle 3-G. for all "left" brake motors (not Quickly T,TT,F) 31.2 mm long

Spacer tube, 39 mm for screwing on the bearing cones

Bosch Multi-range candle, ideal for the Quickly

Plug connector as original! With "NSU" logo

Spark plug connector, orig. Beru, water-protected and interference-suppressed

Speedometer drive - suitable for Quickly N23, S23 and Cavallino

incl. rubber seal suitable for: Quickly N,S,L,N23,S23,S23-2,S2,F - not for T,TT,TT/K

silver-grey - Length: 850 mm Connection nuts top and bottom identical

  Hochwertiger BUMM Marken-Spiegel mit Lenkerinnenbefestigung für die linke Seite Ihres Mopeds.  Der Spiegel ist speziell entwickelt, um direkt in den Lenker eingebaut zu werden, sodass er eine nahtlose Integration und eine klare Sicht auf den rückwärtigen Verkehr ermöglicht. Das robuste Gehäuse gewährleistet Langlebigkeit und Schutz vor Wettereinflüssen. Einfach zu montieren,  

Complete spoke set with 36 chrome-plated thick spokes incl. nipples, for use with new chrome rims. Original "cloverleaf" spokes, German brand quality

Spring plate for compression spring NSU saddle

Galvanised spring retainer on the clutch

Sprocket, chain wheel NSU Quickly 2nd version (bolted), 36 teeth

New starter carburettor with 12 mm passage!

Start slide for all start carburettors

Stand retaining spring for stable tilt stand -standard on Quickly S23,F23,N23, T,TT and TT-K, S2is required for Quickly N,S and L when replacing the wire stand with the tilt stand

suitable for S23,S23-2,F with handlebar fairing - 2keys with extra long key neck!

Suitable for top or bottom (order 2 pcs.)

Stud bolts for cylinder mounting, galvanised - 4 pieces 7 required per engine

Bulb for the rear light for 17 watt system

Rear light complete with rubber pad, suitable for Quickly N23, S23, S2-23 F23 - without bulb

High-gloss polished aluminium fuel filler cap, suitable for all models incl. seal

Lockable fuel filler cap, incl. seal and 2 keys

Metal crest suitable for all 4.5 litre tanks with corresponding cut-out as well as for tanks S23, S23-2 and F23. Order 2 pieces per tank!

Used fuel tank for Quickly 23, good condition, also inside.

Complete cable -incl. top pipe bendPlease note the different versions (model or frame number/carburettor type) and select accordingly!The adjusting screw and rubber grommet on the carburettor are separate parts (see carburettor group),please order separately if required

Complete throttle grip fitting for all Quickly models from vehicle no. 482755(Quickly N,S,N23,S23) with thread for adjusting screw for handbrake cable***Order throttle cable 164400521 as well***

for front or rear thru axle, as original

Thrust washer for 2-speed countershaft or 3-speed. gear shaft 1mm

Set with 1x disc each 0.5-0.6-0.7-0.8-0.9 mm

Thrust washer on throttle grip tube - for all throttle twist grips from vehicle 268 491

Stable stand in top quality for Quickly S23 and S23-2

Tolerance ring for wheel hubs 2nd version is installed between bearing cones and spacer tube

suitable for S23, S2-23, F23

New edition ,suitable for toolbox S23,S23-2,F-- with special lock --

Dab varnish, colour "arconasand" for small touch-ups approx. 20 ml

Transmission shaft (main shaft) for 2-speed engines short version up to engine number 21026 long version from engine 21027

Type plate blanco, incl. 2 fastening rivets for all models for attachment to the frame / control head

Type plate, blank on motor incl. 2 fastening rivets

For the 23 X 2.25 tyres, choose between Conti and Anlas - Both makes are ideally suited for the Quickly.