Clutch cup, new!

Clutch facing plate for all engines, from current production - no old stock in storage

Steel disc1 steel disc is required for a 3-disc clutch, 2 for a 5-disc clutch

Clutch set for 3 or 5 disc clutch from current production. No hardened old stock!

Clutch lever for 3-speed models (Quickly N,S, S23,S2, S2-23, F23)

Clutch lever, galvanised - the clutch cable is usually too long when using old, bent levers!

Set of nuts for clutch or pole wheel, consisting of 1X nut and 2X spring washer - galvanised

Clutch shaft on engine, galvanised

Clutch spring, suitable for all engines, replace the spring when replacing the linings!

Connecting rod bushing for original crankshaftBushing must be reamed to piston pin dimensions .

Connection plate for light cable at the output of the ignition system

Improved version with wider bars - for all 3-speed engines! When replacing the old version with short centre webs (see illustration), the sprocket on the countershaftmust also be replaced.

Cover for shift cable on engine (drive disc) 3-speed -

1 set of cover caps for Quickly F23 shock absorbersmade of aluminium, as original (pair) - these new cover caps area must for a perfect restoration!

Cover gasket for cover plate for starter carburettor

Chrome-plated cover nut on the suspension fork

complete:incl. pressure pin, clamping spring, set screw, 2x screw for cover plate + sealCover plate + seal

Crank keys for bottom bracket axle or pedal crank - 1 set of 2 including nuts

Crankcase centre section for all 2- or 3-speed engines for 2-speed only used, for 3-speed also available as new part, please select accordingly on the scroll bar

Special crankshaft for the discerning rider, manufactured using the latest technology. Very stable, durable design with connecting rod needle bearing!

Full cheek crankshaft type "Sport"More power and torque with the full cheek crankshaft.Achieve optimum performance in the mid to upper speed range thanks to greater pre-compression.Very stable crankshaft with needle bearings - Suitable for all engines! More torque Better pre-compression Better filling ratio Needle bearing mounted stable up to highest speeds

for Quickly 23 front mudguard, metal

4-piece special mounting kit for coat of arms shield

Cylinder head in the original 1.7 hp version for significantly more power - fits all Quickly engines. Fully assembled with new valve and deco gasket, ready to fit!

Cylinder-head gasket 0.75, reinforced, Made in Germany

New decorative lever in original design

Beautiful cover moulding for Quickly 23 tank

Light and horn switch - only for export version Switch for mounting on handlebars Switch position 1-0-2 and horn button

Special disc, required for the valves of the 1st version (from engine number 522990)

Stainless steel disc suspension fork

Assembly lever, required for various work on the engine (levering off the clutch cup, clutch basket etc.) Set with 2 levers

Spacer between fork and mudguard, stainless steel

Original Wippermann Chain, double reinforced in various lengths incl. lock (no. 18) suitable for Quickly S23-2,F When using a 13 chain sprocket, you need the chain with 114 links When using a 14 chain sprocket, you need the chain with 116 links

Driver disc for all 3-speed engines

Brake driver for Quickly S2, F, T and TT (versions with brake lever on the right of the motor)

Sealing rings, set of 4 for brake driver (2x inside and 2x outside)

Replacement flute for the silencer 167102505

Suitable for all models from F.No. 305018 -chrome-plated

Exhaust silencer, suitable for all Quickly models, chrome-plated -incl. exhaust flute-

Exhaust fitting: Cylinder manifold

Locking part for Quickly T motor plates or Quickly S23, F23, S2-23 toolbox 4 pieces are required for Quickly T.

1 set of aluminium notched nails for fixing the type plate

Complete float with needle suitable for all Quickly types.

Float housing cover for all starter carburettor versions

For sealing the float housing - suitable for all carburettor designs

1 set of cover caps for suspension fork, highly polished for Quickly L and F23

Cover over top steering cone, galvanised

New edition - absolutely accurate and stable - UV-resistant! Better than the original!

Used frame for Quickly model 23, as pictured

Used front wheel Quickly F23 - aluminium rim, without brake (Attention: edge on the brake plate mount in 2 places small demolitions-

Replacement seal for all models

Aluminium, high gloss incl. rubber seal

Throttle slide for starter carburettor versions, suitable for 1/9/22 and as a replacement for 1/12/127 carburettors

Special disc in the throttle slide - is placed over the retaining plate

Transmission shaft (main shaft) for all 3-speed engines