Galvanised spring retainer on the clutch

Sprocket, chain wheel NSU Quickly 2nd version (bolted), 36 teeth

New starter carburettor with 12 mm passage!

Start slide for all start carburettors

Steering lock, as original incl. 2 keys

Suitable for top or bottom (order 2 pcs.)

Stud bolts for cylinder mounting, galvanised - 4 pieces 7 required per engine

Bulb for the rear light for 17 watt system

complete with rubber base in black (without bulb) old oval shape with side "porthole"!

Complete rear light with rubber pad and inner part (without bulb) suitable for Quickly N, S, Cavallino - all versions - Replacement from NSU also for the oval predecessor model

Tank 4.5l, used - good inside - good overall condition (one slightly larger dent - see picture)

High-gloss polished aluminium fuel filler cap, suitable for all models incl. seal

Lockable fuel filler cap, incl. seal and 2 keys

suitable for models N,S,L,N23,S2 Select tank version

Complete cable -incl. top pipe bendPlease note the different versions (model or frame number/carburettor type) and select accordingly!The adjusting screw and rubber grommet on the carburettor are separate parts (see carburettor group),please order separately if required

Throttle slide, orig. Bing for carburettor without starting device

Complete throttle grip fitting for all Quickly models from vehicle no. 482755(Quickly N,S,N23,S23) with thread for adjusting screw for handbrake cable***Order throttle cable 164400521 as well***

for front or rear thru axle, as original

Thrust washer for 2-speed countershaft or 3-speed. gear shaft 1mm

Set with 1x disc each 0.5-0.6-0.7-0.8-0.9 mm

Thrust washer on throttle grip tube - for all throttle twist grips from vehicle 268 491

Tolerance ring for wheel hubs 2nd version is installed between bearing cones and spacer tube

from F.No. 281718 painted green, with key plate

Dab varnish, colour "light grey" for small touch-ups approx. 20 ml

Dab varnish, colour "dove grey" for small repairs approx. 15 ml*only suitable for small spot repairs!

Dab varnish, colour "jade green" for small touch-ups approx. 20 ml

Dab varnish, colour "pale green" for small touch-ups approx. 20 ml

Transmission shaft (main shaft) for 2-speed engines short version up to engine number 21026 long version from engine 21027

Type plate blanco, incl. 2 fastening rivets for all models for attachment to the frame / control head

Type plate, blank on motor incl. 2 fastening rivets

classic fine profile. as originalnew designation: 22 - 2From 2 pieces cheaper!

Brand tyres from Conti, profile KKS 10 in size 26x2.00

Upper cone suspension fork for steering

Wedge crank (pedal arms) set for left and right), matt chrome-plated as original in top quality

Wheel ball bearing in original design

classic fine profile - as original -new designation: 22 - 2 - white wall especially a "must" for the Quickly L

Wiring harness for all Quickly models, different versions

Woodruff key crankshaft - Ignition

Matching Woodruff key (pinion gear shaft)