Set of 2 handlebar bolts, cap nuts and washers stainless steel

Set: Quickly 23 handlebars,consisting of: 1 handlebar, 2 handlebar clamps, stainless steel screw set

2 nipples for attaching the 3-speed gearshift cable to the engine (gearshift paddle)

Set of 3 with 0.2 + 0.3 + 0.5 mmbetween bearing cone and brake plate

Bolt set for handlebar support, stainless steel - consisting of 2 bolts, 2 nuts and lock washers.

Set of 2 screws, complete with lock washers and nut, stainless steel

Set of 3 piecesThickness 0.5 -0.6 and 0.7

one pair of rubber blocks under the tank - for Quickly N, S, L, N23, S2 - black -Suitable for all 3.1 and 4.5 litre tanks.

Set with seal, cap and locking disc for decompression valve --set price

Set of 2 springs, suitable for Quickly N,S,L,N23,S23,S23-2,F also for Quickly L suspension

One set of bump stops with rubber buffer (2 pieces for one vehicle), suitable for N,S,L,N23,S23,S2-23,F23

Shift fork for all 2-speed engines

Used shift fork for 3-speed gearbox

New 2-speed gear lever - suitable for all Quickly models, ready to install with rubber grip, clutch lever and screw for deco lever

Shift shaft for all 2-speed engines

Shift spring in gearbox, for all 2-speed engines

Shift claw for all 2-speed engines Installation note: the unscrewed side must face the ignition!

Side stand suitable for Quickly N+S and 23 models (except Quickly F) Easy to fit: 1 engine mounting screw must be replaced by a longer one!

for headlights and fittings 2-coat paint - must be painted over with clear coat.

Suitable for all carburettor models

New sliding wheel for the improved countershaft

Set with cover seal, float seal ring, seal for needle nozzle, clamping spring, retaining plate for nozzle needle, disc for throttle slide, 2 screws each for float housing cover and cover plate Set price

between gear shaft and gear wheel

Set with 0.2 + 0.3 + 0.5 mm disc

Spacer tube on bottom bracket axle for 2-speed motorInstallation note: Clearance between spacer tube and large gear wheel must be 0.2-0.3 mm!

Spacer tube on the bottom bracket axle 3-speed motors (left)

Spacer tube to bottom bracket axle 3-G. for all "left" brake motors (not Quickly T,TT,F) 31.2 mm long

Spacer tube, 39 mm for screwing on the bearing cones

Bosch Multi-range candle, ideal for the Quickly

Plug connector as original! With "NSU" logo

Spark plug connector, orig. Beru, water-protected and interference-suppressed

Speedometer drive - suitable for Quickly N23, S23 and Cavallino

incl. rubber seal suitable for: Quickly N,S,L,N23,S23,S23-2,S2,F - not for T,TT,TT/K

silver-grey - Length: 850 mm Connection nuts top and bottom identical

  Hochwertiger BUMM Marken-Spiegel mit Lenkerinnenbefestigung für die linke Seite Ihres Mopeds.  Der Spiegel ist speziell entwickelt, um direkt in den Lenker eingebaut zu werden, sodass er eine nahtlose Integration und eine klare Sicht auf den rückwärtigen Verkehr ermöglicht. Das robuste Gehäuse gewährleistet Langlebigkeit und Schutz vor Wettereinflüssen. Einfach zu montieren,  

V2A spoke set for NSU-Quickly N23,stainless steel, rustproof - Affordable set with 36 spokes and nipplesM3 spokes, - Nipple size 4.9 mm suitable for Quickly N 23These durable spokes are ideal for restoring your QuicklyComplete set at an unbeatable price!

Set of 36 spokes M3 incl. nipples (18 spokes each length 198mm + 227mm) - only for Quickly N23 (half hub) high-quality chrome-plated spokes * original "cloverleaf" spoke, German brand quality Select the nipple size according to the rims (see product info) When ordering rims and spokes at the same time, please select the outer nipple diameter G: = 5.4 mmNipple size K: outer nipple diameter: 4.9 mm

1K Filling Primer - Primer Shade, 400 ml Recommended for minor damage repair / spot repair and parts painting, as a rust protection primer or primer filler. Suitable substrates: Steel, galvanised steel, aluminium, GRP, cured old paint, spare parts primer, polyester substrates. (Do not recoat with polyester and EP products). Can be used on all metal surfaces Excellent adhesion, high corrosion protection High filling power Can be used variably as a primer or filler Can be painted over with water-based or solvent-based paint Wet-on-wet processing possible Smooth flow, fast drying Good sandability Ideal for spot-repair refinishing (especially for sanded-through areas) Less paint consumption and optimised process times thanks to optimised structure DangerHazard warnings:H222: Extremely flammable aerosol.H229: Pressurised container: may burst if heated.H315: Causes skin irritation.H317: May cause an allergic skin reaction.H318: Causes serious eye damage.H336: May cause drowsiness or dizziness.H412: Harmful to aquatic life with long lasting effects.Precautionary statements: P101: If medical advice is needed, have product container or label at hand.P102: Keep out of reach of children.P103: Read label before use. P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke. P211: Do not spray on an open flame or other ignition source.P251: Do not pierce or burn, even after use.P271: Use only outdoors or in a well-ventilated area.P310: Immediately call a POISON CENTER/doctor.P302+P352: IF ON SKIN: Wash with plenty of water.P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.P501: Dispose of contents/container in accordance with local, regional, national, international regulations

Spring plate for compression spring NSU saddle

Galvanised spring retainer on the clutch

Sprocket, chain wheel NSU Quickly 2nd version (bolted), 36 teeth

New starter carburettor with 12 mm passage!

Start slide for all start carburettors

Steering lock, as original incl. 2 keys

Suitable for top or bottom (order 2 pcs.)

Stud bolts for cylinder mounting, galvanised - 4 pieces 7 required per engine

Bulb for the rear light for 17 watt system

Rear light complete with rubber pad, suitable for Quickly N23, S23, S2-23 F23 - without bulb

Tank 4.5l, used - good inside - good overall condition (one slightly larger dent - see picture)

High-gloss polished aluminium fuel filler cap, suitable for all models incl. seal

Lockable fuel filler cap, incl. seal and 2 keys

Metal crest suitable for all 4.5 litre tanks with corresponding cut-out as well as for tanks S23, S23-2 and F23. Order 2 pieces per tank!

suitable for models N,S,L,N23,S2 Select tank version

Complete cable -incl. top pipe bendPlease note the different versions (model or frame number/carburettor type) and select accordingly!The adjusting screw and rubber grommet on the carburettor are separate parts (see carburettor group),please order separately if required

Complete throttle grip fitting for all Quickly models from vehicle no. 482755(Quickly N,S,N23,S23) with thread for adjusting screw for handbrake cable***Order throttle cable 164400521 as well***

for front or rear thru axle, as original

Thrust washer for 2-speed countershaft or 3-speed. gear shaft 1mm