Set of 2 nuts + 2 spring washers

Set with 2 bearing bolts (special bolt) + 2 stop nuts for rocker arm bearing

Suitable for tilt stands N23,S23,S2-23,F,T,TT, TT/K Set consists of 2 bearing collar bolts + 2 nuts + 4 spring washers

Set with 2 clamping screws + 2 spring washers

Clutch repair kit:Sealing rings for clutch cup and crankshaft,Circlip for clutch basket and lock washers for clutch shaft - 5-piece - Set price -

Suitable for all models from F.No. 482755 (except Cav.)Set of 2 for one rocker arm

Set with 2 bolts + 4 spring washers (VA)

Screw set for fastening the base plate and the breaker. 9-piece

suitable -for twist grip set for left + right Colour: cream Delivery only as PU with 2 pieces only suitable for Quickly T from F.No. 2928720

Set of 2 handlebar bolts, cap nuts and washers stainless steel

2 nipples for attaching the 3-speed gearshift cable to the engine (gearshift paddle)

Set of retaining clips for fixing the reflector (3 parts)

Set with all 3 required rubber grommets/rubber plugs for headlights Set price

Bolt set for handlebar support, stainless steel - consisting of 2 bolts, 2 nuts and lock washers.

Set of 2 screws, complete with lock washers and nut, stainless steel

Set of 3 piecesThickness 0.5 -0.6 and 0.7

one pair of rubber blocks under the tank - for Quickly N, S, L, N23, S2 - black -Suitable for all 3.1 and 4.5 litre tanks.

Set with seal, cap and locking disc for decompression valve --set price

Set of 2 springs, suitable for Quickly N,S,L,N23,S23,S23-2,F also for Quickly L suspension

One set of bump stops with rubber buffer (2 pieces for one vehicle), suitable for N,S,L,N23,S23,S2-23,F23

Used shift fork for 3-speed gearbox

for headlights and fittings 2-coat paint - must be painted over with clear coat.

Suitable for all carburettor models

New sliding wheel for the improved countershaft

Set with cover seal, float seal ring, seal for needle nozzle, clamping spring, retaining plate for nozzle needle, disc for throttle slide, 2 screws each for float housing cover and cover plate Set price

Fußrasten für alle Modelle mit Sitzbank (ausgenommen Quickly T)ovale Ausführung

Set with 0.2 + 0.3 + 0.5 mm disc

Spacer tube on the bottom bracket axle 3-speed motors (left)

Spacer tube to bottom bracket axle 3-G. for all "left" brake motors (not Quickly T,TT,F) 31.2 mm long

Bosch Multi-range candle, ideal for the Quickly

Plug connector as original! With "NSU" logo

Spark plug connector, orig. Beru, water-protected and interference-suppressed

incl. rubber seal suitable for: Quickly N,S,L,N23,S23,S23-2,S2,F - not for T,TT,TT/K

silver-grey - Length: 850 mm Connection nuts top and bottom identical

Speedometer drive for Quickly models with large solid hubs (Quickly S2, S2-23, F23, T, TT, TTK.Version as original VDO.Top quality

  Hochwertiger BUMM Marken-Spiegel mit Lenkerinnenbefestigung für die linke Seite Ihres Mopeds.  Der Spiegel ist speziell entwickelt, um direkt in den Lenker eingebaut zu werden, sodass er eine nahtlose Integration und eine klare Sicht auf den rückwärtigen Verkehr ermöglicht. Das robuste Gehäuse gewährleistet Langlebigkeit und Schutz vor Wettereinflüssen. Einfach zu montieren,  

The spokes for S2 with 25- or 26-inch rims are smooth M3.5 spokes, chrome-plated. Length 229 mm or 243 mm. Original "cloverleaf" spoke Berg-Union, leading manufacturer and supplier for two-wheelers of the 50s and 60s for large solid hubs, please select wheel size!Please note:The spokes are suitable for 26x2.25 punched rims - not for 26x2.00 chrome rims!All spoke sets are complete with nipples, outer nipple diameter (on the shaft) approx. 6 mm.Delivery with smaller nipples possible on request.

Complete headlamp, ready to fit for Quickly N and S

Galvanised spring retainer on the clutch

Sprocket 36 teeth

New starter carburettor with 12 mm passage!

Start slide for all start carburettors

Stand retaining spring for stable tilt stand -standard on Quickly S23,F23,N23, T,TT and TT-K, S2is required for Quickly N,S and L when replacing the wire stand with the tilt stand

Steering lock, as original incl. 2 keys

Suitable for top or bottom (order 2 pcs.)

Stud bolts for cylinder mounting, galvanised - 4 pieces 7 required per engine

for Quickly F23, T,TT TT-K for all 3-speed engines with right-hand brake version

Bulb for the rear light for 17 watt system

Complete rear light with rubber pad and inner part (without bulb) suitable for Quickly N, S, Cavallino - all versions - Replacement from NSU also for the oval predecessor model

High-gloss polished aluminium fuel filler cap, suitable for all models incl. seal

Lockable fuel filler cap, incl. seal and 2 keys

Metal crest suitable for all 4.5 litre tanks with corresponding cut-out as well as for tanks S23, S23-2 and F23. Order 2 pieces per tank!

suitable for models N,S,L,N23,S2 Select tank version

Complete cable -incl. top pipe bendPlease note the different versions (model or frame number/carburettor type) and select accordingly!The adjusting screw and rubber grommet on the carburettor are separate parts (see carburettor group),please order separately if required

Complete throttle grip fitting for all Quickly models from vehicle no. 482755(Quickly N,S,N23,S23) with thread for adjusting screw for handbrake cable***Order throttle cable 164400521 as well***

Stainless steel thru axle front wheel M12 for models S23-2,S/2, F,T,TT

New stainless steel thru axle for the rear hub on models S23-2,F, TT, S2