New complete ignition system with pole wheel for the Quickly, ready to fit incl. ignition cable and light connection plate,Every ignition system is tested by us. Optimum performance again with new ignition!

6 V 15/15 W for headlights Attention only for EXPORT vehicles with high/low beam!

Proven, stable inner tube - our own brand - in sizes 26X2.00 to 26X2.50

New insulating strip for all engines with ignition coil type 1 (coil hole spacing 53mm)

is required in conjunction with the Bakelite piece. (Also standard on all Quickly F and S2-23 models

For starter carburettor types - in conjunction with carburettor gasket 161600008(8mm)

Make "Karcoma" is installed between petrol tap and carburettor

Original Magura PVC handle cover - ivory was originally fitted from the 60s onwards, especially on models S23,S23-2,F for Quickly T only from F.No. 2928721 2 pieces are required per vehicle!

Jet needle for all starter carburettor versions - replace needle and needle jet with original parts for better engine running and lower fuel consumption

Cover for steering lock

Suitable for all toolbox handles N,S,L,N23,S2

Knurled screw with mounting bracket for attaching the headlight insert

Special screw for fastening the clutch lever

Screw for attaching the handbrake lever to the handle fitting! Suitable for all models (not Quickly L)

Number plate holder, galvanised - for easy mounting of the number plate

High-quality 2-component paint colour "lido blue" for Quickly L + S2 with the colour combination lido blue/pearl grey (for frame, handlebars, suspension fork) Paint is mixed with hardener in a ratio of 2:1 (hardener must be ordered separately)

Spray can with 1-component paint in the color lido blue for Quickly S - is required for the color combination pearl grey/lido blue: frame, fork  This 1K acrylic spray paint offers excellent coverage and durability, ideal for restoring and beautifying your NSU Quickly. The special color formula ensures an original appearance and protection against environmental influences. The spray paint is suitable for both minor touch-ups and complete repainting, and its fast drying time saves you long waiting times. You can rely on the quality of this paint, which combines a brilliant appearance with long-lasting protection. Easy to use, it provides an even and smooth finish that is sure to impress.

fit for Quickly N,S,L,S23,S2

Suitable for decovalve and bearing bolt for breaker

1 pair of fuses for gear lever or carrier bolt

1 set of fuses, galvanised

Locking bolt for all 3-speed engines incl. spring

Galvanised locking plate for mounting under the suspension fork cover nut

galvanised

suitable for Quickly N,S,L, N23,S2

Cone on the suspension fork, bottom

Lubricating felt with holder for screwing onto the base plate

Lubricating felt for ignition - version with fastening rivet

Main jet for all Quickly carburettor types - various jet sizes are available for tuning. Standard range for 1/9 carburettors: 54 - 58 Standard rangefor 1/12 carburettors: 60 - 66 All jets are original Bing parts!

Manifold sealing ring suitable for all versions 2 pieces are required

Swivelling mirror for the handlebar mounting in solid and high-quality construction - left Material: arm made of zinc die-castMirror head dimensions: 80 x 120 mm

for mounting with clamp on the handlebars

Connection cover + sign "Denfeld" + 2 screws original Denfeld spare part

Special tool for easy assembly and disassembly of the clutch

suitable for models N,S,N23,S23,S2,S23-2,T high-gloss chrome-plated

Fastening screw with spring washers for stand retaining spring -stainless steel-for all models with tilt stand (standard Quickly S23,S2,S2-23,F23,T,TT,TT-K)and when retrofitting Quickly N,S,N23 to tilt stand version)

Plug nipple for handbrake or clutch cable2 pieces are required per vehicle!

Beautiful reprint of original NSU advertising boards with the slogan"Wann startest Du auf NSU"Each board in Format DIN A3 (297 x 420 mm) - five advertising boards printed on both sides on chromo cardboard (400g/sqm) and glossy foil laminated, with 2 eyelets (each at the top corners).The advertising panel with the imprint "DU" is punched out in the centre.Courtesy of AUDI AG / NSU GmbH

Bell with "NSU" embossing S2: all versions S23-2: all versions Quickly F 23: all versions Quickly N: all/different versions-if applicable. select Quickly N23: all versions Quickly S: all/different versions -select as required Quickly S23: all versions

The repair instructions were once aimed at the mechanics in the NSU workshops and conveyed the specialist knowledge required for a successful repair. Today, on the other hand, the content is primarily aimed at NSU Quickly enthusiasts. Old knowledge from the 1960s is required to successfully maintain the NSU Quickly, to carefully preserve its value or to continue using this popular historic moped. New edition! Old knowledge 1962-

Special nut for the bearing bolt on the suspension fork/swing arm

Stainless steel nut with galvanised spring washer for fastening the brake lever to the brake key (wheel hub)

6-piece, VA

8-piece fastening set nuts and washers for the cylinder head- optionally galvanised or stainless steel -

Stainless steel oil filler or drain plug

Oil drain plug + oil filler plug + oil check plug + 3 seals

with 6mm hose connection. The petrol filter can be dismantled and cleaned, Made in Italy. Dimensions: - Outer diameter approx. 22mm - Total length approx. 64mm - Filter length approx. 40mm - Length of the connections approx. 12mm

New, original front wheel hub for Quickly S2, 2-23,T,TT,TT-K

Collar screw for fastening the decorative lever no. 164400909, galvanised

Oval-head screw for fastening the throttle grip - galvanised - suitable for all models except L and T

for gear lever mounting, suitable for all models except L + T

Inexpensive pillion footrests, folding

High-quality 2-component paint colour "pearl grey" for Quickly L + S2 with the colour combination lido blue/pearl greyfor mudguards + tankPaint is mixed with hardener in a ratio of 2:1 (hardener must be ordered separately)

2K spray can - Contents: 400 mlis required for the colour combination lido blue/pearl grey Quickly S (mudguards + tank) This allows you to paint just like with a spray gun! 2K spray: 2-component technology means 2 components, paint and hardener in one spray paint can The hardener is integrated in a separate container in the spray paint can The hardener is activated or deactivated at the touch of a button. released and mixed with the paint material Petrol resistant DangerHazard statements:H222: Extremely flammable aerosol.H229: Pressurised container: may burst if heated.H317: May cause an allergic skin reaction.H319: Causes serious eye irritation.H332: Harmful if inhaled.H336: May cause drowsiness or dizziness.H412: Harmful to aquatic life with long lasting effects.Precautionary statements: P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke. P211: Do not spray on an open flame or other ignition source.P251: Do not pierce or burn, even after use.P271: Use only outdoors or in a well-ventilated area.P273: Avoid release to the environment.P312: If you feel unwell, call a POISON CENTER/doctor .P302+P352: IF ON SKIN: Wash with plenty of water.P333+P313: If skin irritation or rash occurs: Get medical advice/attention.P337+P313: If eye irritation persists: Get medical advice/attention. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing. P410+P412: Protect from sunlight and do not expose to temperatures exceeding 50 °C/122 °FP501: Dispose of container in accordance with international regulations

UnionPedals, old version,beautiful classic shape

Fabric petrol hose length 1 metre

Petrol hose, clear - new quality! - Petrol and oil resistantUnit 1 m